<aside> ⚠️

Please note: This version is now archived as it's for the A2 revision of the hydrogen subassembly.

</aside>

<aside> ℹ️

This tutorial demonstrates the process of draining the hydrogen unit in the Ammortal chamber. Please scroll to the bottom of the page to find a video walkthrough of this process.

</aside>

<aside> ⚠️

Please note: The Ammortal chamber should never operate without water as this can damage the hydrogen generator. After draining the chamber, be sure to refill the hydrogen reservoir with distilled water with the chamber powered on before starting new sessions.

Filling the chamber with any other water besides distilled can cause major damage and void the warranty.

</aside>

Written Instructions

  1. Turn off the chamber.

    Locate the main power switch

    Locate the main power switch

    IMG_0119.JPG

    IMG_0121.JPG

  2. Prepare a shallow bowl to collect the drained water.

  3. Locate the drain tube beneath the chamber’s base on the right-hand side by reaching under the cladding. Once found, gently pull the tube out to the side.

  4. Position the shallow bowl under the tube with the stopper at the end. Slightly bending the tube before draining can help minimize accidental spills.

  5. Holding the tube over the bowl, remove the stopper and gradually release the bend to allow water to flow. Note: The stopper may be tight and require extra force to remove.

  6. Once the reservoir is fully drained, securely reinsert the stopper and empty the collection bowl.

Video Instructions

IMG_0118.MOV